Metal painting gives a top layer for your Iron and Steel assets like windows, grills(balcony, staircase), cots, gates, metal doors, cabinets, wardrobes, tables, chairs, Iron/Steel Boxes, etc which will improve the shelf life of the assets and avoid rusting, and also it gives a new look to your assets and helps out from rusting and corrosion. We provide the metal painting service in Bangalore.
This composition of metal paint is non - toxic, non combustible and provides 8 years corrosion protection. It can be used for external and internal metal surfaces.
This composition of metal paint is flammable. So it is not safe for painting heating elements of metal structures. It is widely used for galvanizing metal surfaces for both outdoor and indoor.
This composition of metal paint is quite toxic. So it is not used for painting indoor metal surfaces. But its resistance against high temperature property makes it suitable for painting outdoor metal surfaces.
This composition of paint can be used directly on rusted parts of metal surfaces. It is not safe for applying the surface contact with drinking water as this may cause harm to health and not suitable for applying to the products operated above + 150 degree celsius.
Hammer paint for metal paintings consists of fine glass aluminum powder. The paint formulation is based on epoxy, alkyd and acrylic. The painted surface has a rough surface texture similar to hammering effect. This composition of paint has Exquisite resistance to moisture, vibration, and temperature fluctuations of weather conditions. It is suitable for painting iron metal surfaces such as metal garden furniture, wrought iron work, railings and gates etc.
Oil paint for metal painting is intended for coloring household products and decorative materials used for indoors. Not suitable for painting outdoor metal surfaces as it will fade and crack quickly under sunlight.
Get that shiny new look on metal surfaces by using this enamel. Its tough film is highly resistant to household stains.
An economical choice for your household, this enamel can be used on multiple surfaces - be it wood, metal or masonry surfaces.
It is formulated with specially modified PU Alkyd Based Resins to get an excellent durable finish with superior gloss and high gloss retention. It is easy to apply and suitable for metal, wood and masonry surfaces.
Calculate Painting Cost
Nerolac PU Enamel 10 in 1 is a PU modified Alkyd based general purpose enamel for the protection of Metal, Wood & Masonry substrate.
Calculate Painting Cost
Generally, we use water-based acrylic paint or an oil-based paint. Usually, Oil-based paints take more time to dry and also it needs high quality paint brush.
Basically, Primer plays an important prior step to the application of metal paint. Especially if the surface will be exposed to moisture. If water-based primer is not be applied, we have some other option such as iron oxide primer, rust-inhibiting primer are more suitable option.
Firstly, we remove old paint and rust. We use a heavy wired brush to remove as much as possible. Then will rub along with the metal. Then Prime a metal, apply paint & allow to dry the paint
Generally, first step is clean the metal surface must be free from dust, secondly remove loose particals and peeling paint by brushing, sanding or scarping. thirdly, remove emove old paint and rust. We use a heavy wired brush to remove as much as possible. Then will rub along with the metal, fourthly, repair small holes and dents and finally, Prime the surface
Usually, The best primer for metal surfaces should be durable, rust-resistant, and easy to apply. Such as rust-inhibiting primers, galvanized primers, and iron oxide primers. Applying the primer immediately after surface preparation can help keep away flash rusting or dust accumulation.
1. The wrong primer like latex primers are not appropriate for metallic surfaces.
2. Etching Primer, metal-etching primer has an acidic base that allows it to etch slick metallic surfaces.
3. Iron Oxide Primer inhibits rust and is appropriate for any untreated metal surface subject to moisture.
4. Zinc Chromate Primer, it is is highly toxic and is typically not appropriate for use by inexperienced painters.
5. Considerations.
Usually, two coats of primer is will be plenty. Spray in short smooth strokes from sides to sides across the metal.
